Decoker Machines – An Overview
Decoiler Machine has a long list of satisfied customers. Some were very happy with the quality of the machine, while others didn’t think that it could do what they needed it to. Some were disappointed that there was no warranty, while for others, the quality exceeded their expectations. The reviews from the real customers however, are what matters most.
There are only few parameters that you should consider in your search for a decoder machine. The first parameter you should consider is your maximum operating load, usually referred as the Max Load. The rating usually indicates the weight of the machine, which is used for dimensional loading. So, material will definitely have no effect on the overall performance of decoiler machine, except for increased operating costs. However, you still need to take material into consideration even when you select any other non-magnetic coil handling units, such as spring loaded straightener, roll laminator, or compact nic…
Another parameter is the minimum speed of the unit. The dec spoiler machine has two speed settings: low speed and high speed. The low speed allows the machine to be used as a low-powered tool for small jobs and materials. The high speed of decoiler machine enables it to complete large tasks or materials quickly and with much more accuracy than in low speed operation. This is why some manufacturers provide two different types of machines: high speed and low speed.
Most other resurrecting machines use steel coil or chain for operation. The main advantage of using steel coil or chains is that they are generally durable. However, they may be unable to handle larger job sizes and may also break after prolonged use. They may not work for applications where you have to change the part sizes frequently (for example, the application of a small amount of alloy in a high volume production may require a large variety of sizes of steel coil).
A good option for most applications is to use the gear decoder machine as a straightening unit. Unlike the roller or screw auger unit, the gear decoder machine can work in an efficient manner if the materials being worked with are small. It has an inbuilt taper that will reduce the cutting perimeter of the coils while minimizing wear. The ability of the device to work smoothly in low friction conditions makes it a highly preferred choice. For large volume productions, the ability to cut large areas of coils makes the gear decoiler a perfect fit for the job.
Most manual decoiler machines have two speed settings: low speed and high speed. High speed decoilers are suitable for low-magnification jobs, whereas the lower speed decoilers are better suited for larger diameter coils. However, you must make sure that your coiled materials do not bind in the lower speed decoders. Manual machine also have different varieties including power decoilers, electronic coils, manual decoils and decoders with interchangeable nozzles. You can choose the type of nozzle that you prefer according to your application requirements.